The buggy is shown here with the seat level and in its lowest position
Image:
Here the buggy is shown with the seat in the highest position and the seat fully tilted. Any position between these two extremes is possible using the two independent actuators on the seat support frame.
Image:
Image: Ray Lee tees off on his Paragolfer
A few players have been lucky enough to aquire access to this buggy due to personal funding and generous donations.The Foundation has a loan unit that is available for trial purposes and this has recently been to Northern Ireland and North Wales.It is currently in use in Bedfordshire.
This buggy is shown below in its purpose built trailer (see News Page for more details and photos).
Image: loaded and ready for action !
Image: The battery box exposed
First raise the seat using the manual Allen key then undo all the screws holding the main body and pull it off backwards.
Slacken the two pivot screw at the rear of the seat mechanism and remove the two screws at the front of the mechanism.
Remove the two vertical interior "mudguards" and then swivel the seat mechanism upwards and support it as shown on the photo above.
Remove the allen screws holding the steel sheet above the battery box.
Disconnect the battery terminals and lift each one out using the two rope handles at the side.
Other pages:
This is the text-only version of this page. Click here to see this page with graphics.
Edit this page |
Manage website
Make Your Own Website: 2-Minute-Website.com